A denial of service vulnerability in telnetd service on Juniper Networks Junos OS allows remote unauthenticated attackers to cause a denial of service. Affected Junos OS releases are: 12.1X46 prior to 12.1X46-D71; 12.3X48 prior to 12.3X48-D50; 14.1 prior to 14.1R8-S5, 14.1R9; 14.1X53 prior to 14.1X53-D50; 14.2 prior to 14.2R7-S9, 14.2R8; 15.1 prior to 15.1F2-S16, 15.1F5-S7, 15.1F6-S6, 15.1R5-S2, 15.1R6; 15.1X49 prior to 15.1X49-D90; 15.1X53 prior to 15.1X53-D47; 16.1 prior to 16.1R4-S1, 16.1R5; 16.2 prior to 16.2R1-S3, 16.2R2;

Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D30, 12.1X47 before 12.1X47-D20, 12.3 before 12.3R9, 12.3X48 before 12.3X48-D10, 13.2 before 13.2R6, 13.3 before 13.3R5, 14.1 before 14.1R3, and 14.2 before 14.2R1 allows local users to gain privileges via crafted combinations of CLI commands and arguments.

Juniper Junos 12.1X44 before 12.1X44-D45, 12.1X46 before 12.1X46-D30, 12.1X47 before 12.1X47-D15, and 12.3X48 before 12.3X48-D10 on SRX series devices does not properly enforce the log-out-on-disconnect feature when configured in the [system port console] stanza, which allows physically proximate attackers to reconnect to the console port and gain administrative access by leveraging access to the device.

Juniper Junos 11.4 before 11.4R8, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R9, 12.3R2 before 12.3R2-S3, 12.3 before 12.3R3, 13.1 before 13.1R4, and 13.2 before 13.2R1 allows remote attackers to cause a denial of service (assertion failure and rpd restart) via a crafted BGP FlowSpec prefix.

The Juniper SRX Series devices with Junos 11.4 before 11.4R12-S4, 12.1X44 before 12.1X44-D40, 12.1X45 before 12.1X45-D30, 12.1X46 before 12.1X46-D25, and 12.1X47 before 12.1X47-D10, when an Application Layer Gateway (ALG) is enabled, allows remote attackers to cause a denial of service (flowd crash) via a crafted packet.

Juniper Junos 11.4 before R11, 12.1 before R9, 12.1X44 before D30, 12.1X45 before D20, 12.1X46 before D15, 12.1X47 before D10, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D15, 13.2X52 before D15, 13.3 before R1, when using an em interface to connect to a certain internal network, allows remote attackers to cause a denial of service (em driver bock and FPC reset or "go offline") via a series of crafted (1) CLNP fragmented packets, when clns-routing or ESIS is configured, or (2) IPv4 or (3) IPv6 fragmented packets.

Juniper Junos 11.4 before R12-S4, 12.1X44 before D35, 12.1X45 before D30, 12.1X46 before D25, 12.1X47 before D10, 12.2 before R9, 12.2X50 before D70, 12.3 before R7, 13.1 before R4 before S3, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R5, 13.2X50 before D20, 13.2X51 before D26 and D30, 13.2X52 before D15, 13.3 before R3, and 14.1 before R1 allows remote attackers to cause a denial of service (router protocol daemon crash) via a crafted RSVP PATH message.

Juniper Junos 11.4 before R12, 12.1 before R10, 12.1X44 before D35, 12.1X45 before D25, 12.1X46 before D20, 12.1X47 before D10, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4-S3, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D26 and D30, 13.2X52 before D15, 13.3 before R2, and 14.1 before R1, when a RADIUS accounting server is configured as [system accounting destination radius], creates an entry in /var/etc/pam_radius.conf, which might allow remote attackers to bypass authentication via unspecified vectors.

Juniper Junos 11.4 before 11.4R12, 12.1 before 12.1R11, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D30, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R8-S2, 12.3 before 12.3R7, 13.1 before 13.1R4-S2, 13.2 before 13.2R5, 13.3 before 13.3R2-S2, and 14.1 before 14.1R1 allows remote authenticated users to gain privileges via unspecified combinations of CLI commands and arguments.

Juniper Junos 11.4 before 11.4R12, 12.1 before 12.1R10, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R8, 12.3 before 12.3R7, 13.1 before 13.1R4, 13.2 before 13.2R4, 13.3 before 13.3R2, and 14.1 before 14.1R1, when Auto-RP is enabled, allows remote attackers to cause a denial of service (RDP routing process crash and restart) via a malformed PIM packet.